FT891 Digital Config

References

TBD

Introduction

This page captures the current working configuration used to get my Ham transceiver up and running on digital modes. This is currently what works, but should be considered a work in progress.

Menu Number	Menu Name	Setting	Comment
05-06	CAT Rate	38400
05-07	CAT Tot	1000
05-08	CAT RTS	Disable
—	—	—	—
08-01	Data Mode	Others
08-03	Other Disp	1500
08-04	Other Shift	1500
08-05	Data LCut Freq	Off
08-07	Data LCut Slope	Off
08-09	Data in Select	Rear
08-10	Data PTT Select	RTS
08-11	Data Out Level	100
08-12	Data BFO	USB
—	—	—	—
11-08	SSB PTT Select	DAKY
—	—	—	—
16-03	HF Power	100

FLRig XCVR Conf

XCVR
- /dev/ttyUSB0
- 38400
- 1 stop bit
PTT
- CAT Port PTT options
  - PTT via CAT

FLDigi Rig Conf

Rig Control
- FLRig
  - Enable flrig xcvr control with fldigi as client
- Hardware PTT
  - Use separate serial port PTT
  - /dev/ttyUSB1
  - Use RTS
Soundcard
- Devices
  - PulseAudio

WSJTX Radio Conf

Radio
- CAT Control
  - /dev/ttyUSB0
  - 38400
  - Eight
  - One
  - None
- PTT Method
  - RTS
  - Port
    - /dev/ttyUSB1
- Mode
  - Data
- Split
  - None

JS8Call Conf

Radio
- CAT Control
  - /dev/ttyUSB0
  - 38400
  - Eight
  - One
  - None
- Rig Options
  - PTT Method
    - RTS
  - Port
    - /dev/ttyUSB1
  - Mode
    - Data/Pkt
  - Split
    - None

Created: 2022-08-12 12:45
Last update: 2022-08-26 14:48